About our Eyelets
Eyelets in Colors
Finger Pull Eyelet
Flat Flange Eyelets
About our Grommets
Sheet Metal Grommets
Finger Pull Grommet
Rolled Rim Grommet & Spur Washers
Neck Washers for Auto Feed
How to use Cut & Set Dies
How to use Locating Point
How to use Bodkin Point
Intro to Setting Machines
New - Used - Rebuilt Machines
Invisible Rapid Eyeleter
JOPEVI Line Machinery
469 Deep Throat Machine
484 Stimpson Machine
488 Stimpson Machine
489 Stimpson Machines
S83 Single & Dual Feeds
NEW Jopevi Line Machinery
EP-900 Electric Kick Press
AP-900 Pneumatic Kick Press
Bench Top Air Press
Stimpson 479 Machine
Hand Press/Arbor Press
Parts & Manuals
Repair and Rebuild
Spinners & Clamps
New ~ Used ~ Rebuilt Machines
Every Machine is tailored to our Customer's need and price range.
New Machines are hand built individually to suit the needs and specifications of each customer.
We require samples to start and will recommed the proper unit after testing & evaluation.
Call a Machines Sales Rep for more info 800-393-5381
Siska has been buying & selling used machines since the company was formed in 1946.
Before a used machine is sold, it is tested to determine how well it functions. Then it is partially disassembled correcting any function issues.
New tooling, new springs, pins and smaller wear parts are installed; it is then reassembled and tested. The end result is a good working machine at an economical price.
Call a Machine sales rep for more information 800-393-5381
Print this information
In the Reburbish/Rebuilding of machinery, we first select a good used unit to start with. The following procedures then take place:
The machine is stripped down to the bare frame.
The frame and all it's components are chemically cleaned & sand blasted
The frame & all components are then checked for wear & cracks
At this point any parts not adhering to new specifications are replaced
Everything is then painted with high quality enamel paint
All shafts & non castings are de-butted & micro polished
The machine is now
reassembled adhering to manufacturer's specifications
The eyelet/grommet feed unit is then sized to the customer's needs
New tooling/dies are installed
New Motor, switch & wiring are installed
When the machine rebuild process is complete, it is then adjusted, lubricated & tested with samples provided by customer.
Siska Inc. sells to Companies Only
Siska © 2019
1-800 - 393 - 5381